axial lead and cartridge fuses 411 www.littelfuse.com designed to iec standard 5 x 20 mm time lag fuse (slo-blo ) fuse 213 series rohs pb ?designed to international (iec) standards for use globally. ?meets the iec 60127-2, sheet 3 specification for time lag fuses. ?available in cartridge and axial lead form. ?available in ratings of 0.200 to 6.3 amperes. ? rohs compliant and lead-free version available, add xp suffix to standard catalog number electrical characteristics (213 series): % of ampere ampere opening rating rating time 150% .032 6.3 60 minutes, min imum 8 - 15 30 minutes, min imum 210% .032 15 2 minutes, max imum 275% .032 .100 0.2 sec., min. ; 10 sec. max. .125 15 0.6 sec., min. ; 10 sec. max. 400% .032 .100 .04 sec., min. ; 3 sec. max. .125 15 .15 sec., min. ; 3 sec. max. 1000% .032 .100 .01 sec., min. ; 0.3 sec. max. .125 15 0.02 sec., min. ; 0.3 sec. max. interrupting ratings: 35 amperes or 10 x rated current; (whichever is greater) to a maximum 100a @ 250 vac, unity power factor. ordering information: rohs compliant and lead-free version available, add xp suffix to standard catalog number 213 surge withstand cartridge nominal nominal catalog ampere voltage resistance melting number rating rating cold ohms i 2 t a 2 sec. 0213 .200 .200 250 1.60 0.350 0213 .250 .250 250 1.05 0.555 0213 .315 .315 250 0.848 1.14 0213 .400 .400 250 0.535 1.35 0213 .500 .500 250 0.370 2.90 0213 .630 .630 250 0.275 4.80 0213 .800 .800 250 0.165 9.42 0213 001 1 250 0.117 19.20 0213 1.25 1.25 250 0.081 27.15 0213 01.6 1.6 250 0.055 44.2 0213 002. 2 250 0.044 92.7 0213 02.5 2.5 250 0.030 138.0 0213 3.15 3.15 250 0.022 226.5 0213 004 4 250 0.017 202 0213 005. 5 250 0.011 314 0213 06.3 6.3 250 0.008 600 environmental specifications: operating temperature: -55?c to 125?c thermal shock: mil-std-202f method 107g, test condition b: (5 cycles ?5? to +125?) vibration: mil-std-202f method 201a humidity: mil-std-202f method 103b, test condition a. high relative humidity (95%) and elevated temperature (40?) for 240 hours. salt spray: mil-std-202f method 101d, test condition b physical specifications: material: body: glass cap: nickel plated brass leads: tin plated copper terminal strength : mil-std-202f method 211a, test condition a solderability: reference iec 60127 second edition 2003-01 annex a product marking: cap 1: current and voltage rating. cap 2: agency approval markings. packaging: available in bulk (v=5, h=100, m=1000 pcs/pkg) or on tape/reel (mret1=1000 pcs/reel). 11 axial lead and cartridge fuses
axial lead and cartridge fuses 412 www.littelfuse.com designed to iec standard 5 x 20 mm time lag fuse (slo-blo ) fuse 213 series rohs pb 0213 000 2 20+0.5 5.1+0.6 5.2+0.1 -0.2 5.1+0.6 0213 000 xe 1 0.65 40 22.5 max 5.8 max all dimensions in mm notes: * ratings above 6.3a have 0.8 mm dia lead 1 for rohs compliant parts replace xe with xep 2 for rohs compliant parts add suffix 'xp' agency approvals agency approvals ampere range certificate no. 2002010207007597 200ma ?6.3a 2003010207045592 5a recognised file no. e10480 guide no. jdyx2 file no. 029862 acc. class no. lr1422-30 licence no. km41462 file no. 9905092, 9923025, 304515 certificate no cartridge nbk120802-e10480 a&c leaded nbk120802-e10480 b&d 1a ?6.3a 200ma ?6.3a 1000 100 10 1 0.1 current in amperes 0.001 0.01 0.1 1 10 100 1000 10000 time in seconds 0.200a 0.250a 0.315a 0.400a 0.500a 0.630a 0.800a 1a 1.25a 1.6a 2a 2.5a 3.15a 4a 5a 6.3a average time current curves
axial lead and cartridge fuses 413 www.littelfuse.com designed to iec standard 5 x 20 mm time lag fuse (slo-blo ) fuse 218 series rohs pb ?designed to international (iec) standards for use globally. ?meets the iec 60127-2, sheet 3 specification for time lag fuses. ?available in cartridge and axial lead form. ?available in ratings of 0.032 to 15 amperes. ? rohs compliant and lead-free version available, add xp suffix to standard catalog number electrical characteristics (218 series): % of ampere ampere opening rating rating time 150% .032 6.3 60 minutes, min imum 8 - 15 30 minutes, min imum 210% .032 15 2 minutes, max imum 275% .032 .100 0.2 sec., min. ; 10 sec. max. .125 15 0.6 sec., min. ; 10 sec. max. 400% .032 .100 .04 sec., min. ; 3 sec. max. .125 15 .15 sec., min. ; 3 sec. max. 1000% .032 .100 .01 sec., min. ; 0.3 sec. max. .125 15 0.02 sec., min. ; 0.3 sec. max. interrupting ratings: 35 amperes or 10 x rated current; (whichever is greater) to a maximum 100a @ 250 vac, unity power factor. ordering information: rohs compliant and lead-free version available, add xp suffix to standard catalog number 218 cartridge nominal nominal catalog ampere voltage resistance melting i 2 t number rating rating cold ohmns a 2 sec. 218 .032 .032 250 58.45 0.00305 218 .040 .040 250 35.70 0.0055 218 .050 .050 250 23.30 0.0071 218 .063 .063 250 18.1 0.012 218 .080 .080 250 12.6 0.0265 218 .100 .100 250 8.95 0.0495 218 .125 .125 250 4.41 0.150 218 .160 .160 250 2.44 0.225 218 .200 .200 250 1.60 0.350 218 .250 .250 250 1.05 0.555 218 .315 .315 250 0.848 1.14 218 .400 .400 250 0.535 1.35 218 .500 .500 250 0.370 2.90 218 .630 .630 250 0.275 4.80 218 .800 .800 250 0.073 1.99 218 001 1 250 0.055 3.33 218 1.25 1.25 250 0.042 5.80 218 01.6 1.6 250 0.032 10.61 218 002 2 250 0.029 14.80 218 02.5 2.5 250 0.022 23.85 218 3.15 3.15 250 0.017 39.20 218 004 4 250 0.013 70.95 218 005 5 250 0.010 114.0 218 06.3 6.3 250 0.0075 204.0 218 008 8 250 0.0059 350.5 218 010 10 250 0.0045 583.0 218 015 15 250 0.0030 1441.0 environmental specifications: operating temperature: -55?c to 125?c thermal shock: mil-std-202f method 107g, test condition b: (5 cycles ?5? to +125?) vibration: mil-std-202f method 201a humidity: mil-std-202f method 103b, test condition a. high relative humidity (95%) and elevated temperature (40?) for 240 hours. salt spray: mil-std-202f method 101d, test condition b physical specifications: material: body: glass cap: nickel plated brass leads: tin plated copper terminal strength: mil-std-202f method 211a, test condition a solderability: reference iec 60127 second edition 2003-01 annex a terminal strength: mil-std-202f method 211a, test condition a product marking: cap 1: current and voltage rating. cap 2: agency approval markings. packaging: available in bulk (v=5, h=100, m=1000 pcs/pkg) or on tape/reel (mret1=1000 pcs/reel). 11 axial lead and cartridge fuses
axial lead and cartridge fuses 414 www.littelfuse.com 5 x 20 mm time lag fuse (slo-blo ) fuse 218 series rohs pb 0.01 0 . 0 1 0.1 0 . 1 1 10 1 0 100 1 0 0 1000 1 0 0 0 0.032a 0.040a 0.050a 0.063a 0.080a 0.100a 0.125a 0.160a 0.200a 0.250a 0.315a 0.400a 0.500a 0.630a 0.800a 1a 1.25a 1.6a 2a 2.5a 3.15a 4a 5a 6.3a 8a 10a 15a current in amperes 100 10 1 0.1 0.1 1 10 100 1000 0.01 0.01 0.001 10000 1000 time in seconds average time current curves agency approvals agency approvals ampere range certificate no. 2002010207007596 32ma ?6.3a certificate no. su05001-3005 32ma ?40ma su05001-2008 50ma ?800ma su05001-2009 1a ?10a recognised file no. e10480 guide no. jdyx2 file no. 029862 acc. class no. lr1422-30 licence no. km41462 80ma ?6.3a file no. 9850004, 9840179, 9446070, 9708209, 9843043, 312377 & 304650 certificate no. cartridge nbk120802-e10480 a&c leaded nbk120802-e10480 b&d 1a ?15a 32ma ?15a 32ma ?6.3a 32ma ?15a 0218 000 2 20+0.5 5.1+0.6 5.2+0.1 -0.2 5.1+0.6 40 22.5 max 5.8 max 0218 015 . xe 1 0218. 125 xe 1 to 0218. 100 xe 1 0218. 032 xe 1 to 0.65 0.65* 40 22.5 max 6.0 max all dimensions in mm notes: * ratings above 6.3a have 0.8 mm dia lead 1 for rohs compliant parts replace xe with xep 2 for rohs compliant parts add suffix 'xp' note: 8a and 10a are under consideration by iec(125v). designed to iec standard
|
